Avaliação da fixação dos avanços maxilares pela técnica de osteotomia Le Fort I / Evaluación de la fijación de avances maxilar mediante la técnica de osteotomía Le Fort I / Evaluation of the fixation of maxillary advancements by the Le Fort I osteotomy technique

Introdução: A osteotomia Le Fort I possibilita a correção de deformidades dentofaciais que envolvem o terço médio da face. Para sua fixação, convencionou-se o emprego de quatro mini-placas nos pilares zigomático-maxilar e nasomaxilar. Propôs-se então, a dispensa da fixação do segmento posterior, surgindo questionamentos relacionados à capacidade biomecânica do sistema. Objetivos: Comparar o estresse biomecânico gerado em três meios distintos de fixação da osteotomia Le Fort I frente ao movimento de avanço sagital linear maxilar de 7mm. Metodologia: Trata-se de uma pesquisa experimental laboratorial, utilizando-se da análise de elementos finitos como ferramenta analítica, a fim de constatar qual das técnicas sofrerá maior estresse biomecânico. Resultados: Constatou-se que o estresse biomecânico gerado é maior quando aplicado em 4 pontos do que quando aplicado em apenas 2 pontos. Conclusão: Os resultados obtidos fornecem informações aos cirurgiões sobre a real necessidade do uso de fixação adicional de acordo com o método de fixação planejado. No entanto, deve ser interpretado de forma cautelosa, considerando-se as limitações deste estudo. Sendo assim, uma análise incipiente, que tem como intuito o fornecimento de evidência científica de grande significância.

Introducción: La osteotomía Le Fort I permite la corrección de deformidades dentofaciales que involucran el tercio medio de la cara. Para su fijación se acordó utilizar cuatro miniplacas en los pilares cigomaticomaxilar y nasomaxilar. Entonces se propuso prescindir de la fijación del segmento posterior, planteando interrogantes relacionados con la capacidad biomecánica del sistema. Objetivos: Comparar el estrés biomecánico generado en tres medios diferentes de fijación de la osteotomía Le Fort I frente a un movimiento de avance sagital lineal maxilar de 7mm. Metodología: Se trata de una investigación experimental de laboratorio, utilizando como herramienta analítica el análisis de elementos finitos, con el fin de comprobar cuál de las técnicas sufrirá un mayor estrés biomecánico. Resultados: Se encontró que el estrés biomecánico generado es mayor cuando se aplica en 4 puntos que cuando se aplica solo en 2 puntos. Conclusión: Los resultados obtenidos brindan información a los cirujanos sobre la necesidad real de utilizar fijación adicional de acuerdo al método de fijación planificado. Sin embargo, debe interpretarse con cautela, considerando las limitaciones de este estudio. Por tanto, un análisis incipiente, que pretende aportar evidencias científicas de gran trascendencia.

Introduction: The Le Fort I osteotomy allows the correction of dentofacial deformities involving the middle third of the face. For its fixation, it was agreed to use four mini plates on the zygomaticomaxillary and nasomaxillary pillars. It was then proposed to dispense with the fixation of the posterior segment, raising questions related to the biomechanical capacity of the system. Objectives: To compare the biomechanical stress generated in three different means of fixation of the Le Fort I osteotomy against a 7mm maxillary linear sagittal advancement movement. Methodology: This is an experimental laboratory research, using finite element analysis as an analytical tool, in order to verify which of the techniques will suffer greater biomechanical stress. Results: It was found that the biomechanical stress generated is greater when applied to 4 points than when applied to only 2 points. Conclusion: The results obtained provide information to surgeons about the real need to use additional fixation according to the planned fixation method. However, it should be interpreted with caution, considering the limitations of this study. Therefore, an incipient analysis, which aims to provide scientific evidence of great significance.

Comparison Between Surgical and Conservative Treatment for AOSpine Type A3 and A4 Thoracolumbar Fractures without Neurological Deficit: Prospective Observational Cohort Study / Comparação entre tratamento cirúrgico e conservador para fraturas toracolombares AOSpine tipo A3 e A4 sem déficit neurológico: Estudo de coorte prospectivo observacional

Abstract Objective To compare the clinical results between conservative (CS) and surgical treatment (CXS) of A3 and A4 fractures without neurological deficit. Methods Prospective observational study of patients with thoracolumbar fractures type A3 and A4. These patients were separated between the surgical and conservative groups, and evaluated sequentially through the numeric rating scale (NRS), Roland-Morris disability questionnaire (RMDQ), EuroQol-5D (EQ-5D) quality of life questionnaire, and Denis work scale (DWS) up to 2.5 years of follow-up. Results Both groups showed significant improvement, with no statistical difference in pain questionnaires (NRS: CXS 2.4 ± 2.6; CS 3.5 ± 2.6; p> 0.05), functionality (RMDQ: CS 7 ± 6.4; CXS 5.5 ± 5.2; p> 0.05), quality of life (EQ-5D), and return to work (DWS). Conclusion Both treatments are viable options with equivalent clinical results. There is a tendency toward better results in the surgical treatment of A4 fractures.

Resumo Objetivo Comparar os resultados clínicos entre os tratamentos conservador (CS) e cirúrgico (CXS) das fraturas A3 e A4 sem déficit neurológico. Métodos Estudo prospectivo observacional de paciente com fraturas toracolombares tipo A3 e A4. Esses pacientes foram separados entre os grupos cirúrgico e conservador e avaliados sequencialmente através da escala numérica de dor (NRS), do questionário de incapacidade de Roland-Morris (RMDQ), do EuroQol-5D (EQ-5D) e da escala de trabalho de Denis (DWS) até 2,5 anos de acompanhamento. Resultados Ambos os grupos apresentaram melhora significante, sem diferença estatística nos questionários de dor (NRS: CXS 2,4 ± 2,6; CS 3,5 ± 2,6; p> 0,05), funcionalidade (RMDQ: CS 7 ± 6,4; CXS 5,5 ± 5,2; p> 0,05), qualidade de vida (EQ-5D) e retorno ao trabalho (DWS). Conclusão Ambos os tratamentos são opções viáveis e com resultados clínicos equivalentes. Há uma tendência a melhores resultados no tratamento cirúrgico das fraturas A4.

3D-printing-assisted surgery versus conventional surgery for treatment of Schatzker VI tibial plateau fractures: a multi-center clinical study / 中华创伤骨科杂志

Objective:To compare 3D-printing-assisted surgery and conventional surgery in the treatment of Schazker type Ⅵ tibial plateau fractures.Methods:A retrospective study was conducted to analyze the clinical data of 50 patients with type Ⅵ tibial plateau fracture who had been treated from January 2019 to December 2021 at the 5 Departments of Orthopedics in The First Affiliated Hospital of Nanchang University, The First People's Hospital of Jiujiang, Pingkuang General Hospital, Ganzhou People's Hospital, and Nanchang Hongdu Hospital of Traditional Chinese Medicine. The patients were divided into 2 groups according to their different treatment methods. In the 3D printing group of 25 cases treated by 3D-printing-assisted surgery, there were 14 males and 11 females, with an age of (42.5±9.1) years; in the conventional group of 25 cases treated by conventional surgery, there were 13 males and 12 females with an age of (42.2±9.3) years. The 2 groups were compared in terms of operation time, intraoperative blood loss, intraoperative fluoroscopy frequency, fracture healing time, postoperative complications, the Rasmussen radiological scores and the American Hospital for Special Surgery (HSS) knee function scores at 6 and 12 months after operation.Results:There was no significant difference in the preoperative general data between the 2 groups, indicating comparability ( P>0.05). The operation time [(125.4±10.6) min], intraoperative blood loss [(206.2±16.3) mL], intraoperative fluoroscopy frequency [(9.2±2.7) times] and fracture healing time [(3.0±0.7) months] in the 3D printing group were all significantly less than those in the conventional group [(168.2±14.1) min, (303.2±20.4) mL, (15.5±3.5) times and (4.1±0.8) months] while the Rasmussen radiological scores (17.6±1.2 and 17.9±0.6) and HSS knee scores (90.8±6.4 and 91.5±5.6) at 6 and 12 months after operation in the 3D printing group were all significantly higher than those in the conventional group (16.2±2.6 and 16.7±2.2; 84.5±9.2 and 87.6±8.0) (all P<0.05). In the 3D printing group, there were 1 case of wound infection and 1 case of wound dehiscence after operation. In the conventional group, there were 2 cases of wound skin necrosis, 3 cases of wound dehiscence, 1 case of traumatic arthritis, 2 cases of wound infection, and 1 case of screw loosening. The incidence of complications in the 3D printing group (8.0%, 2/28) was significantly lower than that in the conventional group (36.0%, 9/25) ( P<0.05). Conclusion:In the treatment of Schatzker type VI tibial plateau fractures, compared with conventional surgery, 3D-printing-assisted surgery can lead to better curative outcomes, because it is conducive to lowering surgical difficulty, reducing postoperative complications, and promoting fracture union and functional recovery of the knee.

Arthroscopic minimally invasive reduction for talus posterior process fractures / 中华创伤骨科杂志

Objective:To evaluate the efficacy of arthroscopic minimally invasive reduction in the treatment of talus posterior process fractures.Methods:The clinical data were retrospectively studied of the 42 patients with talus posterior process fracture who had been admitted to Department of Orthopedics, The Fourth Hospital of Wuhan from January 2010 to June 2021. There were 25 males and 17 females, aged from 21 to 60 years (average, 40.5 years). They were assigned into 2 groups according to their different treatments. In the arthroscopic group of 15 cases, arthroscopic reduction and internal fixation (ARIF) were conducted via the posteromedial and posterolateral approaches; in the open reduction group of 27 cases, open reduction and internal fixation (ORIF) were conducted via the posteromedial para-Achilles approach. The 2 groups were compared in terms of operation time, blood loss, hospital stay, fracture clinical healing time, postoperative complications, and the American Society for Foot and Ankle Surgery (AOFAS) ankle-hindfoot score at one year postoperation.Results:There was no significant difference in the preoperative general data between the 2 groups, showing comparability ( P> 0.05). The arthroscopic group incurred significantly less blood loss [(32.0±11.5) mL], hospital stay [(5.3±1.8) d], and fracture clinical healing time [(4.6±1.0) months], and a significantly lower incidence of postoperative complications [20.0% (3/15)] than the open reduction group did [(80.0±15.2) mL, (8.4±2.4) d, (6.3±2.2) months, and 29.6% (8/27)], but significantly longer operation time [(74.0±8.9) min] than the open reduction group [(62.9±5.1) min] ( P<0.05). The AOFAS ankle-hindfoot scores at one year postoperation in both groups were higher than those before operation. The AOFAS ankle-hindfoot scores in the arthroscopic group [(83.0±13.0) points] were significantly higher than those in the open reduction group [(72.3±16.0) points] ( P<0.05). Conclusion:ARIF is a preferred minimally invasive treatment for talus posterior process fractures, because it leads to a smaller incision, less blood loss, shorter hospital stay, quicker clinical healing, a lower incidence of postoperative complications, and better functional improvement of the ankle and hindfoot than ORIF.

Effect of titanium plate internal fixation combined with titanium nail intermaxillary traction on jaw fractures / 中华医学美学美容杂志

Objective:To observe the difference in the effect of simple titanium plate internal fixation and titanium plate internal fixation combined with titanium nail intermaxillary traction in the treatment of jaw fractures and their impact on the oral and maxillofacial function of patients.Methods:From August 2016 to May 2021, 94 patients with jaw fractures admitted to the Department of Stomatology, Linyi Central Hospital, Shandong (supplementing the gender, age range and average age of the patients), were divided into 47 cases in the control group, and the titanium plates were used alone, combined operation group 47 cases, titanium plate internal fixation combined with intermaxillary traction with titanium nails. The changes of oral and maxillofacial function and fracture healing were measured before operation and 3 months after operation, and the perioperative indicators and postoperative complications were recorded.Results:Three months after operation, the scores of maxillofacial function, mouth function and masticatory function in the combined operation group (0.52±0.09 points, 0.67±0.12 points, 0.58±0.08 points) were significantly lower than those in the control group (1.05±0.21 points, 1.14±0.22 points, 1.02±0.21 points) ( t=15.90, 12.86, 13.42, P<0.05). The effective rate of the combined operation group was 95.74% (45/47), which was significantly higher than that of the control group (80.85%, 38/47) (χ 2=5.05, P<0.05); there was no significant difference in operation time and hospitalization time between the groups ( P>0.05), the fracture healing time in the combined surgery group (65.02±7.06) d was significantly shorter than that in the control group (82.69±10.25) d ( t=9.73, P<0.05). The postoperative complication rate of combined treatment group was 6.38% (3/47), which was significantly lower than the control group 21.28% (10/47) (χ 2=4.37, P<0.05). Conclusions:In the treatment of jaw fractures, titanium plate internal fixation combined with titanium nail intermaxillary traction treatment can significantly improve the oral and maxillofacial function of patients, promote postoperative fracture healing, improve curative effect and reduce the incidence of complications compared with simple titanium plate internal fixation.

Clinical effect of arthroscopic reduction and suture for tibial intercondylar eminence fractures by perforated Kirschner wire / 中华实用儿科临床杂志

Objective:To investigate the clinical effect of arthroscopic reduction of tibial intercondylar ridge fractures in children using a 2.0 mm perforated Kirschner wire to establish bone tunnels and the Krackow-" 8" suture.Methods:From January 2018 to December 2020, 24 children (14 males and 10 females, aged 6-15 years) with tibial intercondylar ridge fractures admitted to Children′s Hospital of Nanjing Medical University were retrospectively recruited for analyses.All patients were treated with arthroscopic reduction, non-absorbable Krackow-" 8" suture for the base of the anterior cruciate ligament, and establishment of bone tunnels by 2.0 mm perforated Kirschner wire from the proximal tibial epiphysis for inserting a suture to fix the fractures.The affected limb was immobilized with a cast for 4 weeks, followed by active exercises postoperatively.Knee function was assessed using the Lysholm score and IKDC 2000 subjective score.Knee stability was evaluated using the Lachman test.X-rays were taken at 3 and 6 months postoperatively to evaluate fracture healing.Growth retardation of epiphyseal plate at 2 years of follow-up was assessed by bilateral knee X-rays.Results:All the 24 cases were successfully operated, with the operation time of (63.1±20.2) (40-115) min.All children were followed up for 24-36 months[(28.7±3.4) months]. All children achieved an anatomical reduction of the fracture postoperatively.No complications like fracture displacement, suture rupture, or infection were reported.All fractures healed completely at 3 months postoperatively.At the last follow-up, the Lysholm score and IKDC 2000 subjective score were (94.4±4.8) points and (93.8±5.6) points, respectively.The positive Lachman test was detected in 2 patients.No inhibition of proximal tibial epiphyseal growth was observed.Conclusions:Arthroscopic reduction with non-absorbable Krackow-" 8" suture and establishment of bone tunnels using a 2.0 mm perforated Kirschner wire for the treatment of tibial intercondylar ridge fractures in children has the advantages of simple surgical procedures, minimal invasiveness, which is an effective treatment method.

Biomechanical Comparison of Internal Fixation by Traditional and Cortical Bone Trajectory Pedicle Screw / 医用生物力学

Objective To compare the effects of cortical bone trajectory ( CBT) and traditional trajectory ( TT)pedicle screw internal fixation on the range of motion (ROM) and rod system stress of normal and osteoporotic(OP) spines. Methods The L3-S1 finite element models of normal and OP spines were established. The screwrod system with two kinds of trajectory was used for internal fixation of the L4-5 segment, so as to simulate sixphysiological loads, namely, flexion, extension, left / right bending, left / right rotation. The effects of two internalfixation methods on ROMs and maximum equivalent stress of screws in normal and OP spines were compared.Results For both bone conditions, CBT and TT significantly reduced ROM of the fixed segment (L4-5) and theentire segment of lower lumbar spine ( L3-S1). However, the ROM decline of CBT group was slightly smaller than that of TT group, and their ROMs were similar under flexion and extension, but the ROM differences were significant under lateral bending and axial rotation. In addition, for both the normal and OP spine models, themaximum equivalent stress of screws in CBT group was significantly higher than that in TT group. Compared withTT group, the screw stress of CBT group in normal spine model under flexion and extension, lateral bending,axial rotation was increased by 27% , 268% and 58% , respectively. However, when CBT technique was used atthe same time, the OP spine model had a smaller screw stress distribution than the normal spine model.Conclusions Compared with TT technique, CBT technique can achieve higher screw stress under OP conditionand reduce screw stress concentration under normal bone condition. In addition, CBT slightly increases ROMs of each segment, which is conducive to recovery of spinal physiological function after surgery. Lateral bending and axial rotation can produce negative mechanical effects, and these two physiological loads should be avoided.

Double-pulley combined with suture bridge technique for fixation of comminuted fractures of distal patella pole / 中国骨伤

OBJECTIVE@#To investigate the clinical effect of double pulley combined with suture bridge in the treatment of comminuted fracture of the lower pole of the patella.@*METHODS@#From January 2018 to June 2020, 15 patients with comminuted fracture of the lower pole of the patella were treated with double pulley and suture bridge technology, including 9 males and 6 females, aged 28 to 68 years old with an average of (42.4±9.6) years old. All patients had obvious knee joint pain and limited movement after injury. All knee joints were examined by X-ray and CT, which confirmed that they were all comminuted fractures at the lower level of the patella. After operation, X-ray films of the knee joint were taken regularly to understand the fracture healing, the Insall Salvati index was measure, the range of motion of the joint was recorded, and the function of the knee joint was evaluateed by the Bostman scoring system.@*RESULTS@#All the 15 patients were followed up for 7 to 24 months with an average of (11.4±4.2) months, and there was no obvious anterior knee pain. At the last follow-up, the knee joint range of motion of the affected limb was 105° to 140° with an average of (128.5±12.8) °, and the Insall Salvati index was 0.79 to 1.12 with an average of (0.92±0.18). The X-ray film showed that the patella was bone healing, and no anchor fell off, broken, or displaced fracture block was found. Bostman patellar fracture function score was 27.85±2.06, 13 cases were excellent, 2 cases were good.@*CONCLUSION@#Double pulley technique combined with suture bridge technique is reliable for reduction and fixation of comminuted fracture of the lower pole of patella, and patients can start functional exercise early after operation.

Prediction of internal fixation failure of femoral trochanteric fracture by external wall morphology / 中国骨伤

OBJECTIVE@#To investigate the relationship between the shape of the lateral wall and the early failure of internal fixation in the fracture of the femoral trochanteric region(FFT).@*METHODS@#Total 295 patients with femoral trochanteric fracture underwent internal fixation from January 2015 to January 2020 were selected. The patients were divided into two groups according to whether there was early internal fixation failure after surgery, 19 patients in the failure group and 276 patients in the normal group. Gender, affected side, age, AO classification, body mass index(BMI), preoperative hemoglobin, X-ray measurement of lower lateral wall thickness, preoperative internal diseases, intraoperative blood loss, postoperative tip apex distance(TAD), postoperative neck shaft angle, operation time and other data were compared between two groups. The shape of the lateral wall was compared between two groups, and the correlation between the shape of the lateral wall and the early internal fixation failure of femoral trochanteric fracture was analyzed.@*RESULTS@#All patients were followed up for more than 1 year. There was no significant difference between two groups in terms of intraoperative blood loss, operation time, postoperative TAD, and postoperative neck shaft angle(P>0.05). At the latest follow-up, the visual anaglue scale (VAS) of the failure group was higher than that of the normal group(P<0.01), and the Harris score of the failure group was lower than that of normal group(P<0.05). The receiver operator characteristic (ROC) curve between shape of lateral wall and failure of early internal fixation of femoral trochanteric fracture was drawn. The critical value of the midpoint lateral wall thickness was 16.5 mm, and the area under the ROC curve was 0.845;The critical value of average sidewall thickness was 16.5 mm, and the area under ROC curve was 0.838;The critical value of the axial area of the sidewall was 7.5 mm, and the area under the ROC curve was 0.826.@*CONCLUSION@#The shape of the lateral femoral wall measured by CT could be used as a predictive factor for the early failure of internal fixation of femoral trochanteric fractures. For patients at risk, more reasonable surgical plans and postoperative preventive measures should be developed.

Comparison of effect between internal fixation and total hip replacement in the treatment of displaced femoral neck fracture in middle age patients / 中国骨伤

OBJECTIVE@#To analyze and compare the clinical efficacy of internal fixation and total hip replacement in the treatment of displaced femoral neck fracture from 55 to 65 years.@*METHODS@#From September 2016 to August 2020, 86 patients with Garden type Ⅲ or Ⅳ femoral neck fracture were divided into two groups according to different surgical methods. Among them, 38 patients were treated with lag screws for internal fixation, there were 26 males and 12 females, aged 55 to 64 years old with an average of(60.2±3.1) years;the other 48 patients were treated with total hip replacement, including 28 males and 20 females, aged from 57 to 65 years old with an average of(61.3±3.8) years. The time from injury to operation ranged from 1 to 3 days. The reoperation rate, incidence of deep infection, Harris score of hip joint function, visual analogue scale(VAS) of pain and patients reported outcome scores(European five-dimensional Health Questionnaire, EQ-5D) were compared between two groups.@*RESULTS@#All patients were followed up for 24 to 54 months with an average of (35.8±10.3) months. There was significant difference in reoperation rate between two groups (P<0.05). There was no significant difference on the incidence of deep infection, hip Harris score and VAS between two groups(P>0.05) . The postoperative EQ-5D score of patients with internal fixation was lower than that of total hip replacement, and the difference was statistically significant(P<0.05).@*CONCLUSION@#Both the surgery of internal fixation and total hip replacement have similar effect in short-and medium term among the patients aged 55 to 65 years old. However, for the reoperation rate, the group of internal fixation was higher than that of total hip replacement. For the subjective functional score of patients, the group of internal fixation was lower than that of total hip replacement.

Comparison of curative effect between percutaneous compression plate and cannulated compression screw in the treatment of displaced femoral neck fractures in young and middle-aged patients / 中国骨伤

OBJECTIVE@#To compare the efficacy of percutaneous compression plate and cannulated compression screw in the treatment of displaced femoral neck fractures in young and middle-aged patients.@*METHODS@#From January 2015 to July 2020, 68 young and middle-aged patients with displaced femoral neck fracture were retrospectively analyzed. Among them, 31 cases were fixed by percutaneous compression plate (PCCP), and 37 cases were fixed by cannulated compression screw (CCS). General data such as gender, age, cause of injury, comorbidities, fracture classification and cause of injury of two groups were collected. The operation time, intraoperative blood loss, hospital stay, full weight bearing time, fracture healing time, visual analogue scale(VAS), Harris hip score and complications were compared between two groups.@*RESULTS@#Patients in both groups were followed up for more than 2 years. There were no significant differences in operation time, intraoperative blood loss, fracture reduction quality, hospital stay and VAS between two groups. The fracture healing time in PCCP group was significantly shorter than that in CCS group (t=-4.404, P=0.000). The complete weight bearing time of PCCP group was significantly shorter than that of CCS group (t=-9.011, P=0.000). Harris score of hip joint in PCCP group was better than that in CCS group 2 years after operation (P=0.002). Complications occurred in 3 cases (9.68%) in PCCP group, while 11 cases (29.72%) in CCS group, with a statistically significant difference (P=0.042).@*CONCLUSION@#Both PCCP and CCS can be used for the treatment of displaced femoral neck fractures in young and middle-aged people. Compared with CCS, PCCP fixation can achieve shorter fracture healing time and create conditions for early full weight bearing. PCCP results in higher hip score and lower complications.

Comparison of curative effect between Tianji robot assisted screw placement and traditional cannulated screw internal fixation for femoral neck fracture / 中国骨伤

OBJECTIVE@#To investigate the clinical efficacy and advantages of Tianji orthopedic robot assisted cannulated screw internal fixation for femoral neck fracture.@*METHODS@#The clinical data of 41 patients with femoral neck fracture who underwent internal fixation with cannulated screws from January 2019 to January 2022 were retrospectively analyzed. According to different surgical methods, they were divided into Tianji robot group and traditional cannulated screw fixation group (traditional operation group). Among them, there were 18 patients in Tianji robot group including 8 males and 10 females with age of (56.00±4.22) years old, Garden typeⅠ (4 cases), type Ⅱ (11 cases), type Ⅲ (2 cases), and type Ⅳ (1 case). There were 23 patients in the traditional operation group, including 10 males and 13 females, aged (54.87±4.81) years old;there were 5 cases of Garden typeⅠ, 14 cases of type Ⅱ, 3 cases of type Ⅲ and 1 case of type Ⅳ. The operation time, intraoperative blood loss, fluoroscopy times, guide needle placement times, operation costs and other indicators were observed and compared between two groups. Harris score was used to evaluate hip joint function 12 months after operation.@*RESULTS@#The wounds of all patients healed in Grade A without complications. There were significant differences between two groups in terms of operation time, times of intraoperative fluoroscopy, times of guide needle placement, amount of intraoperative bleeding, and operation cost (P<0.05). All 41 patients were followed up for at least 12 months. The fractures of both groups were healed. There was no infection, screw loosening, fracture displacement and femoral head necrosis in Tianji robot group during follow-up;Screw loosening occurred in 2 patients in the traditional operation group during follow-up. At 12 months after operation, Harris hip joint function score of Tianji robot group was higher than that of traditional operation group in daily activity, lameness, joint activity score and total score (P<0.05).@*CONCLUSION@#Tianji robot assisted nail placement is a better method for the treatment of femoral neck fracture, which improves the surgical efficiency, is more accurate, has higher success rate of one-time nail placement, shorter operation time, less radiation, and has better hip joint function recovery after surgery.

Application of 3D printing percutaneous guide plate in closed reduction and cannulated screw internal fixation of femoral neck fracture / 中国骨伤

OBJECTIVE@#To investigate the application of 3D printing percutaneous surgical guide plate in closed reduction and cannulated screw internal fixation of femoral neck fracture.@*METHODS@#The clinical data of 12 patients with femoral neck fracture from March 2019 to March 2022 were retrospectively analyzed. Patients were divided into observation group and control group according to different operation plans, with 6 cases in each group. The observation group received percutaneous operation guide plate assisted closed reduction and hollow screw internal fixation, while the control group received closed reduction and hollow compression screw internal fixation. The operation time, intraoperative blood loss, fluoroscopy times, and Kirschner needle puncture times were compared between two groups. The location of screws were recordedon postoperative X-ray films, follow-up time, time of complete fracture healing, Harris score of hip joint and the incidence of complications were recorded on postoperative X-ray films.@*RESULTS@#The operation time of observation group (32.17±6.18) min was shorter than that of control group (53.83±7.31) min (P<0.05). The amount of intraoperative bleeding in the observation group (18.33±2.94) ml was less than that in the control group (38.17±5.56) ml(P<0.05). The times of fluoroscopy in the observation group (7.50±1.05) were less than those in the control group (21.00±4.82) (P<0.05). The number of Kirschner needle punctures (8.00±0.63) in observation group was less than that in control group (32.67±3.08) (P<0.05). The follow-up time was(12.88±0.74) months in observation group and (12.83±0.72) months in control group, there was no significant difference between two groups (P>0.05). One year after operation, Harris score of hip joint in the observation group was(82.00±4.52) points, while that in the control group was(81.00±3.41) points, there was no significant difference between two groups(P>0.05). The time of complete fracture healing in the observation group was (7.50±1.05) months, while that in the control group was (7.67±1.21) months, there was no significant difference between two groups(P>0.05). The parallelism of the screws in the observation group was (0.50±0.11) ° and (0.76±0.15) °, which were lower than that in the control group (1.57±0.31) ° and (1.87±0.21) ° (P<0.05). The screw distribution area ratio (0.13±0.02) cm2 in the observation group was higher than that in the control group (0.08±0.01) cm2 (P<0.05). No complications such as necrosis of femoral head, nonunion of fracture, shortening of femoral neck and withdrawal of internal fixation occurred in both groups.@*CONCLUSION@#The application of 3D printing percutaneous surgical guide plate improves the accuracy and safety of closed reduction and cannulated screw internal fixation for femoral neck fracture. It has the advantages of minimally invasive, reducing radiation exposure, fast and accurate, shortening the operation time and reducing intraoperative bleeding.

Olecranon osteotomy approach for Dubberley type Ⅲ coronal fractures of the distal humerus / 中国骨伤

OBJECTIVE@#To retrospectively analyze the clinical efficacy of olecranon osteotomy approach in the treatment of Dubberley type Ⅲ coronal fractures of the distal humerus and summarize the treatment experience.@*METHODS@#From January 2016 to June 2020, 17 patients (5 males and 12 females) with Dubberley type Ⅲ coronal fractures of the distal humerus were treated by olecranon osteotomy approach. The age ranged from 37 to78 years old with an average of (58.5±12.9) years old. According to Dubberley classification, there were 5 cases of type Ⅲ A and 12 cases of type Ⅲ B. The curative effect was evaluated using the Borberg-Morrey elbow function score. The flexion, extension and rotation range of motion of the elbow joint, complications and postoperative imaging evaluation were recorded.@*RESULTS@#All the 17 patients got bony union. The follow-up time ranged from 12 to 33 months with an average of (15.6±5.6) months. There was 1 case of ischemic necrosis of capitulum humeri, 2 cases of traumatic arthritis and 1 case of heterotopic ossification, 1 case of malunion of fracture. The range of motion was (114.80±19.50) °. The Broberg-Morrey score was 85.3±8.2, excellent in 5 cases, good in 9 cases, fair in 3 cases and poor in 0 case.@*CONCLUSION@#Through olecranon osteotomy approach, the articular surface of distal humerus could be fully exposed, and the operation is convenient. Anatomical reduction and rigid fixation of the articular surface of distal humerus are the key factors for the succesful outcome.

Analysis of Revision Content and Evaluation Attentions on Guidance for Registration of Metallic Bone Plate Internal Fixation System (Revised in 2021) / 中国医疗器械杂志

This study briefly introduces the revised content of Guidance for Registration of Metallic Bone Plate Internal Fixation System (Revised in 2021) compared to the original guidance, mainly including the principles of dividing registration unit, main performance indicators of standard specification, physical and mechanical performance research, and clinical evaluation. At the same time, in order to provide some references for the registration of metallic bone plate internal fixation system, this study analyzes the main concerns in the review process of these products based on the accumulation of experience combining with the current review requirements.

Short term follow-up of unstable femoral neck fractures in young adults treated with femoral neck system and cannulated compression screws / 中国骨伤

OBJECTIVE@#To investigate the clinical efficacy of femoral neck system(FNS) and three cannulated compression screws(CCS) in the treatment of unstable femoral neck fractures in young adults.@*METHODS@#The clinical data of 52 young and middle-aged patients with unstable femoral neck fractures admitted from August 2018 to August 2021 were reviewed and analyzed. All patients were divided into two groups according to the internal fixation method, 25 cases were treated with FNS fixation, 27 cases were treated with closed reduction and 3 CCS inverted triangular distribution. The operation time, incision length, intraoperative bleeding, hospitalization expenses and fracture reduction quality of two groups were recorded and compared;The patients were followed up regularly after operation. The fracture healing time, complete weight-bearing time and postoperative complications(nonunion, femoral neck shortening, femoral head necrosis) of two groups were compared. The Harris score was used to evaluate hip function 6 months after surgery.@*RESULTS@#The operation was successfully completed in both groups. The patients in FNS group had more bleeding, longer incision length and higher hospitalization cost than CCS group(P<0.01). There ware no significant difference in operation time and Garden index between two groups(P>0.05). Patients in both groups were followed up for 6 to 32 months.The fracture healing time in FNS group was less than that in CCS group, the time of complete weight bearing after surgery was earlier than that in CCS group, and the hip Harris score was higher than that in CCS group (P<0.01). There were no internal fixation fracture complications in two groups during follow-up. In the FNS group, there were 4 cases of avascular necrosis of the femoral head and 2 cases of femoral neck shortening, of which 3 cases underwent total hip replacement due to avascular necrosis of the femoral head. In the CCS group, there were 2 cases of nonunion, 9 cases of avascular necrosis of the femoral head, and 11 cases of femoral neck shortening, among which 5 cases underwent total hip replacement due to nonunion and avascular necrosis of the femoral head.@*CONCLUSION@#With simple operation, rotational stability and angular stability, FNS enables patients to start functional exercise as early as possible and reduces the incidence of postoperative complications of unstable femoral neck fracture. It is a new choice for the treatment of unstable femoral neck fracture in young adults.

Risk factors of elbow stiffness after open reduction and internal fixation of intercondylar fracture of humerus / 中国骨伤

OBJECTIVE@#To investigate the risk factors of elbow stiffness after open reduction and internal fixation of intercondylar fracture of humerus.@*METHODS@#From March 2015 to February 2019, 120 patients with humeral intercondylar fractures were treated with open fixation including 59 males and 61 females, aged from 25 to 77 years with an average of(53.5±3.2) years. According to the occurrence of elbow stiffness after operation, 120 patients were divided into stiffness group(37 cases) and control group(83 cases). The related factors of elbow stiffness were analyzed by single factor analysis, and the risk of elbow stiffness after internal fixation of humeral intercondylar fracture was analyzed by logistic regression factor.@*RESULTS@#There were 37 cases of elbow stiffness(stiff group), and 83 cases had no elbow stiffness(control group). The incidence of joint stiffness was 30.83%. There were significant differences between the stiffness group and the control group in age, injury energy, fracture to operation time, AO classification of fracture, open injury and postoperative premature or hyperactivity. Multivariate logistic regression analysis showed that age>50 years old, high energy injury, AO classification of fracture, open fracture and postoperative premature or hyperactivity were risk factors for elbow stiffness after internal fixation of humeral intercondylar fracture. The postoperative mobility and Mayo elbow performance score(MEPS) scores of the postoperative stiffness group were lower than those of the non-stiffness group with statistical significance(P<0.05). There were no significant differences in postoperative mobility and MEPS scores between flexion stiffness and rotation stiffness after humeral intercondylar fracture(P>0.05).@*CONCLUSION@#In view of the risk factors of elbow stiffness after internal fixation of humeral intercondylar fracture, reasonable operation plan and rehabilitation strategy should be formulated before operation to minimize the incidence of elbow stiffness.

The analysis of the therapeutic effect for 10 cases of type C extreme distal radial fracture in micro needle plate internal fixation / 中国骨伤

OBJECTIVE@#To analyze the clinical outcomes of mini-plate combined with wireforms in the treatment of Type C distal radial fractures with marginal articular fragments.@*METHODS@#This retrospective study included a total of 10 cases, including 5 males and 5 females, with 6 cases involving the left side and 4 cases involving the right side, of Type C distal radial fractures with marginal articular fragments. The age of the patients ranged from 35 to 67 years old. All patients underwent surgical treatment utilizing mini-plate combined with wireforms for internal fixation.@*RESULTS@#The follow-up period ranged from 6 to 18 months. Complete fracture healing was observed in all cases, with healing times ranging from 10 to 16 weeks. During the entire follow-up period, patients reported high levels of satisfaction with the treatment outcomes, and there were no incidences of incision infection, chronic wrist pain, or wrist traumatic arthritis. At the final follow-up assessment, the Mayo score for the wrist joint ranged from 85 to 95, with 7 cases rated as excellent and 3 cases as good.@*CONCLUSION@#Mini-plate combined with wireforms proves to be an effective fixation method for Type C distal radial fractures with marginal articular fragments. The early initiation of wrist joint exercises, strong fixation, maintenance of proper reduction, minimal complications, and high rates of excellent and good outcomes demonstrate the reliability and efficacy of this treatment approach.

Efficacy of micro steel plate and Kirschner needle oblique and transverse internal fixation of adjacent metacarpal bone in the treatment of metacarpal diaphyseal oblique fracture / 中国骨伤

OBJECTIVE@#To compare the clinical efficacy of micro steel plate and Kirschner needle oblique and transverse internal fixation of adjacent metacarpal bone in the treatment of metacarpal diaphyseal oblique fracture.@*METHODS@#Fifty-nine patients with metacarpal diaphyseal oblique fractures admitted between January 2018 and September 2021 were selected as the study subjects and divided into the observation group (29 cases) and the control group (30 cases) based on different internal fixation methods. The observation group was treated with Kirschner wire oblique and transverse internal fixation of adjacent metacarpal bones, while the control group was treated with micro steel plate internal fixation. Postoperative complications, operation time, incision length, fracture healing time, treatment cost, and metacarpophalangeal function were compared between the two groups.@*RESULTS@#No incision or Kirschner wire infections occurred in the 59 patients, except for one in the observation group. No fixation loosening, rupture, or loss of fracture reduction occurred in any of the patients. The operation time and incision length in the observation group were (20.5±4.2) min and (1.6±0.2) cm, respectively, which were significantly shorter than those in the control group (30.8±5.6) min and (4.3±0.8) cm (P<0.05). The treatment cost and fracture healing time in the observation group were (3 804.5±300.8) yuan and (7.2±1.1) weeks, respectively, which were significantly lower than those in the control group (9 906.9±860.6) yuan and (9.3±1.7) weeks (P<0.05). The excellent and good rate of metacarpophalangeal joint function in the observation group was significantly higher than that in the control group at 1, 2, and 3 months after operation (P<0.05), but there was no significant difference between the two groups at 6 months after operation (P>0.05).@*CONCLUSION@#Micro steel plate internal fixation and Kirschner wire oblique and transverse internal fixation of adjacent metacarpal bones are both viable surgical methods for treating metacarpal diaphyseal oblique fractures. However, the latter has the advantages of causing less surgical trauma, shorter operation time, better fracture healing, lower cost of fixation materials, and no need for secondary incision and removal of internal fixation.

Analysis of the causes and clinical results of vertebral fracture during oblique lateral lumbar interbody fusion / 中国骨伤

OBJECTIVE@#To analyze the causes of vertebral fracture during oblique lateral interbody fusion in the treatment of lumbar spondylopathy, summarize the clinical results, and propose preventive measures.@*METHODS@#Retrospective analysis was made on the data of 8 cases of lumbar spondylopathy and vertebral fracture treated by oblique lateral interbody fusion in three medical centers from October 2014 to December 2018. All were female, aged from 50 to 81 years with an average of 66.4 years. Disease types included 1 case of lumbar degenerative disease, 3 cases of lumbar spinal stenosis, 2 cases of lumbar degenerative spondylolisthesis and 2 cases of lumbar degenerative scoliosis. Preoperative dual energy X-ray bone mineral density test showed that 2 cases had T-value >-1 SD, 2 cases had T-value -1 to -2.5 SD, and 4 cases had T-value <-2.5 SD. Single segment fusion was in 5 cases, two segment fusion in 1 case and three segment fusion in 2 cases. Four cases were treated with OLIF Stand-alone and 4 cases were treated with OLIF combined with posterior pedicle screw fixation. Postoperative imaging examination showed vertebral fracture, and all of them were single vertebral fracture. There were 2 cases of right lower edge fracture of upper vertebral body at fusion segment, 6 cases of lower vertebral body fracture at fusion segment, and 6 cases with endplate injury and fusion cage partially embedded in vertebral body. Three cases of OLIF Stand-alone were treated with pedicle screw fixation via posterior intermuscular approach, while one case of OLIF Stand-alone and four cases of OLIF combined with posterior pedicle screw fixation were not treated specially.@*RESULTS@#The 5 cases of initial operation and 3 cases of reoperation did not show wound skin necrosis or wound infection. The follow-up time was from 12 to 48 months with an average of 22.8 months. Visual analogue scale (VAS) of low back pain was preoperative decreased from 4 to 8 points (averagely 6.3 points) and postoperative 1 to 3 points (averagely 1.7 points) at the final follow-up. Oswestry disability index (ODI) was preoperative 39.7% to 52.4% (averagely 40.2%), and postoperative 7.9% to 11.2% (averagely 9.5%) at the final follow-up. During the follow-up, there was no loosening or fracture of the pedicle screw system, and no lateral displacement of the fusion cage;however, the fusion cage at the vertebral fracture segment had obvious subsidence. The intervertebral space height of vertebral fracture segment was preoperaive 6.7 to 9.2 mm (averagely 8.1 mm), and postoperative 10.5 to 12.8 mm (averagely 11.2 mm). The improvement rate after operation was 37.98% compared to preoperative. The intervertebral space height at final follow-up was 8.4 to 10.9 mm (averagely 9.3 mm), and the loss rate was 16.71% compared with that after operation. At the final follow-up, interbody fusion was achieved in all cases except for one that could not be identified.@*CONCLUSION@#The incidence of vertebral fracture during oblique lateral interbody fusion in the treatment of lumbar spondylopathy is lower, and there are many reasons for fracture, including preoperative bone loss or osteoporosis, endplate injury, irregular shape of endplate, excessive selection of fusion cage, and osteophyte hyperplasia at the affected segment. As long as vertebral fracture is found in time and handled properly, the prognosis is well. However, it still needs to strengthen prevention.